The $800 Masterpiece: Why Major Golf Brands Should Fear the Haywood MB Iron

From 1020 carbon steel to 100% CNC-milled precision, we put the Haywood MB to the test to see if a $799 DTC iron can actually outclass the $1,600 industry giants.

Photo of the Haywood MB iron
(Image credit: Future)
Golf Monthly Verdict

The golf equipment world is changing, and the "Big Manufacturers" should be worried. After extensive testing, the Haywood MB irons prove that you no longer need to pay a "Tour Tax" for a premium, CNC-milled masterpiece. With a silhouette that rivals the best from Cobra and Mizuno, and a "buttery" feel that outshines the gold standards from Titleist and Srixon, these 1020 carbon steel blades aren't just a budget alternative - they are a masterclass in minimalist precision. If you can get past the logo, you'll find a set of irons that performs at the highest level for a staggering price tag.

Reasons to buy
  • +

    Clean, minimalist, and non-glare finish

  • +

    More balanced impact feel than many "major" brand blades

  • +

    $799 for a full 4-PW set should be a market-shaker

Reasons to avoid
  • -

    Sole Width: At 0.6", it may have potential to dig for steeper swingers

Why you can trust Golf Monthly Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.

It’s happening. The golf equipment landscape is shifting.

For years, the ‘big manufacturers’ have dominated the bag of the aspirational ball-striker, but the rise of Direct-to-Consumer (DTC) brands is forcing a total re-evaluation of what constitutes a "premium" iron in the blade sector.

Having spent some time on the course and practice ground with the Haywood MB irons, I’m not just impressed; I’m struggling to find a reason why anyone would pay double for a legacy logo.

Photo of the Haywood MB iron

(Image credit: Future)

Haywood takes a refreshingly purist approach to the design process.

The MB is 100% CNC milled from a single block of 1020 soft carbon steel. Unlike traditional forging, which can have slight weight variances, the milling process - which takes roughly 2.5 to 3 hours per head - ensures incredible precision and consistency in CG (center of gravity) placement.

The aesthetic is, quite simply, outstanding. It is clean, minimalist, and features beautiful texturing on the back cavity that catches the light without being distracting, while the non-glare matte finish is a sophisticated touch that makes them look like a boutique, high-end tool.

Behind the ball, it just gets better. The profile is breathtaking.

Photo of the Haywood MB iron at address

7-Iron

(Image credit: Future)

I recently dubbed the Cobra 3DP MB as essentially "perfect" at address, but the Haywood might be the only blade I’ve seen to rival it in the playing position. In fact, there is half an argument to be made that these are better.

They feature slightly less offset and a rounded toe that suits my eye perfectly, avoiding the overly angular "boxy" look found in models like the Mizuno Pro 241 or S1. It is a silhouette that inspires confidence through its simplicity.

As ever, feel is obviously subjective, but the Haywood MB is undeniably "buttery." Impact is superbly soft, at the very least comparable to anything from the major manufacturers.

Photo of the Haywood MB face

(Image credit: Future)

In fact, in my testing, I actually found the sensation at impact to be softer and more "dense" than a couple of the major players in the Titleist 620 MB or the Srixon Z-Forged II - two irons often cited as the gold standard in the best blade category.

Feedback is instant. You know exactly where you’ve struck it on the face, but even slight mishits don't produce the jarring vibration you might expect from a pure blade.

Photo of the Haywood MB from the toe

(Image credit: Future)

In terms of performance, truthfully, in this category, launch monitor data is almost entirely irrelevant as a comparison tool.

A one-piece forged blade with conservative lofting (7 iron is at 34˚) time and time again produces the same numbers for me (and I test a lot of clubs!), no matter what brand name is stamped on the bottom, because there is no hollow body or face flexion that can be tweaked or tuned for power.

What is important to note is that the Haywood MB delivered the exact same spin, launch, and carry windows as models twice the price.

Photo of the Haywood MB sole

The MB features a very thin 0.6" sole width

(Image credit: Future)

One talking point is the turf interaction.

Featuring arguably the slimmest soles on the market at just 0.6", there is zero "fluff" here. If you are a shallow "picker" of the ball, this is your dream scenario. I tend to be a touch on the steeper side, so they demanded a bit more concentration to avoid digging. However, when my swing was on, the leading edge cut through the turf like a sharp knife through a well-cooked fillet.

The elephant in the room here - and what should be very concerning for the 'big-name' brands is the price. You can pick up a 4-PW set starting from a quite staggering $799/£608.

For a club that matches or exceeds the "big brands" in looks, feel, and precision, that is mind-blowingly good value.

Photo of the Haywood MB iron

(Image credit: Future)

Furthermore, the level of customization available on the website is phenomenal - even down to a wide selection of custom, artisan-style ferrules to personalize your purchase.

If you can move past brand-name bias, in my opinion, there is literally no discernible gain to be found by spending $1,600 elsewhere.

The Haywood MB represents the pinnacle of the DTC movement: premium performance without the "tour pro" tax. For those spending their hard-earned cash, these might just be the best-kept secret in golf.

Joe Ferguson
Staff Writer

Joe has worked in the golf industry for nearly 20 years in a variety of roles. After a successful amateur career being involved in England squads at every age group, Joe completed his PGA degree qualification in 2014 as one of the top ten graduates in his training year and subsequently went on to become Head PGA Professional at Ryder Cup venue The Celtic Manor Resort. Equipment has always been a huge passion of Joe’s, and during his time at Celtic Manor, he headed up the National Fitting Centres for both Titleist and Taylormade. He’s excited to bring his knowledge of hardware to Golf Monthly in the form of equipment reviews and buying advice.

Joe lives in North Devon and still plays sporadically on the PGA West region circuit. His best round in recent years came earlier in 2023 where he managed a 9 under par 63 at Trevose GC in a Devon & Cornwall PGA Tournament.

Joe's current What's In The Bag?

Driver: Switch between TaylorMade Qi35 and Callaway Elyte TD - both with Fujikura Ventus Black 6-X

Fairway wood 1: TaylorMade BRNR Copper Mini Driver - Fujikura Ventus Black 7-X

Fairway wood 2: Callaway Apex UW 17˚- Fujikura Ventus Black 9-X

Irons: TaylorMade P7CB 3-PW with Dynamic Gold Tour Issue X100 shafts

Wedges: Callaway Opus 50, 54, and 60 degrees - Project X LS 6.0 shafts

Putter: LAB Golf Oz.1 (zero shaft lean)

Ball: TaylorMade 2024 TP5x

Grips: Golf Pride Tour Velvet 60R

Bag: Vessel Player IV Pro DXR Stand

You must confirm your public display name before commenting

Please logout and then login again, you will then be prompted to enter your display name.