Tour Edge Hot Launch Max-D Driver Review
Joe Ferguson has been testing out the latest ‘slice-busting’ driver from Tour Edge Golf. It promises much, but does it deliver?
The Tour Edge Hot Launch Max-D is a definitive slice-killer. While the loud, metallic impact acoustics and offset look may divide opinion, the performance is undeniable. It delivers impressive ball speeds and a reliable draw bias for just $299.99. For chronic slicers seeking easy launch and maximum value, this functional, clean-looking driver is a bargain.
-
+
The combination of offset and heel weighting makes it HEAVILY draw biased
-
+
High-end face technology at a fraction of the cost of premium competitors
-
+
The crown is refreshingly simple with a sleek, matte-black look and zero distracting graphics
-
+
Surprisingly controlled spin rates
-
-
The impact sound is very loud and "clangy"
-
-
While functional, the significant offset at the hosel can be jarring to look at for traditionalists
Why you can trust Golf Monthly
Of all the ball flights in golf, the “excessive fade” (I'm being sensitive here) is arguably the most debilitating.
An uncontrollable slice not only robs you of distance but also makes the fairway feel about three yards wide. Tour Edge has long been a champion of the "game-improvement" sector, and their new Hot Launch Max-D driver is a focused mission designed to eliminate the right side of the course (for right-handers) once and for all.
I've been testing it out to see how it stacks up against some of the best drivers for slicers in the game...
At $299.99, the Max-D (the 'D' standing for draw) is packed with more technology than its price tag suggests.
The headline feature is the Diamond Face VFT, a series of 37 thick and thin diamond shapes behind the face that act as mini-trampolines. This is tech borrowed from their premium Exotics range, aimed at maintaining ball speeds on off-center strikes.
To combat the slice, Tour Edge has employed a triple-threat of draw-bias features: internal heel weighting, a closed face angle, and a significant offset hosel.
Complementing this is the V-Taper Sole, which pushes weight to the extreme rear perimeter to maximize MOI (Moment of Inertia) and ease of launch.
Subscribe to the Golf Monthly newsletter to stay up to date with all the latest tour news, equipment news, reviews, head-to-heads and buyer’s guides from our team of experienced experts.
Pulling the Max-D from its headcover, I was immediately struck by the simplicity of the crown, offering a wonderfully clean appearance at address, free from the distracting banner strips or busy graphics that often plague modern drivers.
However, the notable offset - designed to give the clubhead a fraction of a second longer to square up - is impossible to miss. It is a functional look that will likely divide opinion, but for the chronic slicer, it’s a visual cue of the help on offer.
That said, it is significantly less prominent than the offset on the Oximity driver I tested last year.
If there is a trade-off for the entry-level price point, it’s in the acoustics. The impact sensation is robust, bordering on "clangy." It is a loud, high-pitched acoustic that I didn’t particularly enjoy, and for reasons known only to the engineers, it felt noticeably louder than the standard Max driver in the same family.
It’s a sensation and an acoustic that won't be for everyone.
I tested the 10.5-degree head fitted with an Aldila Ascent shaft in S-Flex. Even as someone who typically suits a 9-degree head and an X-Flex shaft, the results were pretty good.
Firstly, the ball speed.
While there is a slight drop compared to the more expensive Exotics range, it was nowhere near as significant as I had anticipated. The Diamond Face tech clearly does its job in keeping the numbers respectable.
In terms of flight, the Max-D did exactly what it says on the tin: it went left, and very left! For the life of me, I couldn't cut or fade this club. For a golfer who fights a slice, this is the ultimate medicine.
Interestingly, despite the 10.5-degree loft and my higher swing speed, the spin didn't get out of control. It launched easily but stayed remarkably stable, spinning only marginally more than the 9-degree Max version I tested.
The Tour Edge Hot Launch Max-D is a definitive solution to a specific problem. If you can get over the loud impact noise and the unconventional look of the offset hosel, the value proposition here is fantastic. It’s a $299.99 "slice-killer" that allows you to swing freely without worrying about the right-hand rough. For the frustrated slicer, that kind of confidence is worth every penny.

Joe has worked in the golf industry for nearly 20 years in a variety of roles. After a successful amateur career being involved in England squads at every age group, Joe completed his PGA degree qualification in 2014 as one of the top ten graduates in his training year and subsequently went on to become Head PGA Professional at Ryder Cup venue The Celtic Manor Resort. Equipment has always been a huge passion of Joe’s, and during his time at Celtic Manor, he headed up the National Fitting Centres for both Titleist and Taylormade. He’s excited to bring his knowledge of hardware to Golf Monthly in the form of equipment reviews and buying advice.
Joe lives in North Devon and still plays sporadically on the PGA West region circuit. His best round in recent years came earlier in 2023 where he managed a 9 under par 63 at Trevose GC in a Devon & Cornwall PGA Tournament.
Joe's current What's In The Bag?
Driver: Switch between TaylorMade Qi35 and Callaway Elyte TD - both with Fujikura Ventus Black 6-X
Fairway wood 1: TaylorMade BRNR Copper Mini Driver - Fujikura Ventus Black 7-X
Fairway wood 2: Callaway Apex UW 17˚- Fujikura Ventus Black 9-X
Irons: TaylorMade P7CB 3-PW with Dynamic Gold Tour Issue X100 shafts
Wedges: Callaway Opus 50, 54, and 60 degrees - Project X LS 6.0 shafts
Putter: LAB Golf Oz.1 (zero shaft lean)
Ball: TaylorMade 2024 TP5x
Grips: Golf Pride Tour Velvet 60R
Bag: Vessel Player IV Pro DXR Stand
You must confirm your public display name before commenting
Please logout and then login again, you will then be prompted to enter your display name.